Bob, To me it looks like a d followed by an e just enables the DAC control voltage. Am I missing something? Does it do a calibration of some kind?
Thanks for all your help. Garren -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bob Camp Sent: Monday, February 25, 2013 4:24 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Lady Heather numbers Hi Useful link: http://www.ke5fx.com/heather/readme.htm For a screen command list hit space. Poking around at them can be fun! To get into the OCXO calibration hit d followed by e. Only works after you are locked up. Bob On Feb 25, 2013, at 6:45 PM, J. L. Trantham <[email protected]> wrote: > I am not familiar with the OCXO Calibration Routine. Can you elaborate? > > I am a 'newbie' with Lady Heather. > > Thanks. > > Joe > > -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of Bob Camp > Sent: Monday, February 25, 2013 11:35 AM > To: 'Discussion of precise time and frequency measurement' > Subject: Re: [time-nuts] Lady Heather numbers > > Hi > > Based on a very short display time, nothing looks seriously broken. > I'd suggest running the OCXO calibration routine at some point. > Everything is still warming up / settling out for the first week or > two, so who knows where it will finish out at. > > Bob > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of Garren Davis > Sent: Monday, February 25, 2013 12:00 PM > To: Discussion of precise time and frequency measurement > Subject: [time-nuts] Lady Heather numbers > > > Hi, > > I have been playing with my thunderbolt and Lady Heather over the > weekend. I hope it's ok that I attached a screen dump of what I have. > Can anyone comment on the picture. It's been running less than a day > and I don't know if what I have would be considered good as far as > accuracy and stability is concerned. > > Thanks. > > Garren > > > > > > > ________________________________ > > This message and any attached documents contain information from > QLogic Corporation or its wholly-owned subsidiaries that may be > confidential. If you are not the intended recipient, you may not read, > copy, distribute, or use this information. If you have received this > transmission in error, please notify the sender immediately by reply > e-mail and then delete this message. > > > _______________________________________________ > time-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ________________________________ This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
