Hi It's not just the hot enough to be lockable that you are after. You also are after a condition where you can tell the difference between several transitions. Locking to the wrong one isn't a good thing.
I suspect they do something like: wait for oven to cut back, then delay for xxx seconds. That's a lot easier than deciding based on a temperature sensor reading. Bob On Mar 12, 2013, at 7:25 AM, Magnus Danielson <[email protected]> wrote: > On 12/03/13 12:03, Bob Camp wrote: >> Hi >> >> I'm not sure that the cheap ones really report back the temperature as part >> of the BITE. I suspect they report something more along the lines of "oven >> is not running all the time". > > I'm after "sufficiently high" here, as in lockable, and I wonder if not the > LPRO already has that detection. Hope that it has a linear oven rather than > bang-bang regulated. > > Cheers, > Magnus > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
