Hi One other important question - is this a basement project, or is it part of your day job? Put another way - are you after a quick / dirty / cheap solution or is there a real budget behind the question?
If it's a day job sort of thing, there are a number of test sets out there that will do the job just fine. Bob -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Doering Sent: Tuesday, March 19, 2013 12:11 AM To: [email protected] Subject: [time-nuts] TIE measurement for arbitrary frequency oscillator Hi all! First time poster here, but I've been lurking for a couple months and found this place to be highly informative. I want to measure TIE for a 7.362 MHz oscillator. Ultimately, I want to process into TDEV and MTIE. 1) Is it acceptable to use the DMTD method and set a signal generator (driven by rubidium) as the reference frequency to a value equal to the oscillator's? 2) If not, can you point me to a more proper way of doing this type of measurement for arbitrary frequencies that are not easily divisible into 10 MHz? Thank you! _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
