It has caused a lot of confusion, admittedly. That's why, in the more recent releases, I changed the label on the icon to "KE5FX TBolt (Seattle, USA)." But it seems that's still not enough of a hint, because people still write me from various countries asking why their Thunderbolt's location is off by several thousand km. :)
-- john, KE5FX Miles Design LLC > -----Original Message----- > From: [email protected] [mailto:time-nuts- > [email protected]] On Behalf Of Chuck Harris > Sent: Sunday, March 24, 2013 10:44 AM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] LH web traffic > > The first time I fired up LH, I was very surprised to see that it > thought I was in a location very far from here. I was also quite > surprised to see that the temperature it was measuring was quite > different from mine, and that it didn't seem to care if my TB was > turned on, or off..... > > Then I read the instructions, and found that the LH package has > a sample version that is connected over the internet to the one > of the author's TB's. > > You have to read a little more and set up your own version for > your own TB. > > -Chuck Harris > > Louis Williams wrote: > > Using LH to monitor a TBolt and notice a continuous flow of traffic between > that > > computer and the internet. The Trimble software does not do this. Would > > someone educate me on why LH needs to talk to the web? Thanks. > > > > Lou Williams > > _______________________________________________ _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
