This stuff really does work. You heat it until the hot melt glue just starts to be squeezed out the ends of the tube. There are two grades. The best is a 4:1 shrink the cheaper kind is 3:1. It is really hard to remove it is decide to take it apart later.
This is sold by WM. They are only a mile from my house so it is hard to resist buying it there. Best quality bet not cheap.<http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10001&storeId=11151&productId=35291&langId=-1#.UWrspb_pl4o> Here is another source of it one more<http://www.buyheatshrink.com/heatshrinktubing/4to1adhesive.htm> On Sun, Apr 14, 2013 at 4:15 AM, Didier <[email protected]> wrote: > Raychem invented that process 50 years ago with polyolefin. Now everybody > makes it with all kinds of materials. If it had been invented by Disney, > they would have copyrighted it instead of patented it and nobody else would > make it :) > Didier > > > DaveH <[email protected]> wrote: > > >Kind of a cool technology -- they bombard the outside of the tube with > >an > >electron beam that cross-links the polymer but leaves the inside > >untouched. > >The outside becomes hard but still shrinks. The inside just melts into > >a > >goo when heated. > > > >Dave > > > >> -----Original Message----- > >> From: [email protected] > >> [mailto:[email protected]] On Behalf Of Peter Gottlieb > >> Sent: Saturday, April 13, 2013 15:24 > >> To: [email protected] > >> Subject: Re: [time-nuts] Connectors > >> > >> Think of heat shrink with a layer of hot melt glue on the > >> inside. Such stuff is > >> used in most outdoor and especially underground utility > >> wiring. Shrink the > >> tubing and it melts the glue and the contracting tubing > >> forces the glue into > >> every crevice making a great waterproof splice. > >> > >> > >> On 4/13/2013 5:07 PM, Hal Murray wrote: > >> >> Can someone in the know clarify this? > >> > I'm not in the know. > >> > > >> > Several years ago, I found a short chunk of coax that the > >> cable TV guys had > >> > left on the ground. It included a piece of heavy wall > >> shrink tubing. There > >> > was a layer of sticky goop between the coax and the shrink tubing. > >> > > >> > > >> > >> _______________________________________________ > >> time-nuts mailing list -- [email protected] > >> To unsubscribe, go to > >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > >> and follow the instructions there. > > > >_______________________________________________ > >time-nuts mailing list -- [email protected] > >To unsubscribe, go to > >https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > >and follow the instructions there. > > -- > Sent from my Nexus 7 tablet. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > -- Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
