Try Stabilant.
http://www.amazon.com/Stabilant-5ml-Kit-Makes-30ml/dp/B001E50GQS
I have no affiliation with this product. I've used it to fix
intermittent connections that drove me crazy. It's not a contact
cleaner, and you'll have to read the details to understand what it does.
It's also avaliable from Napa auto parts as CE-1. It's not cheap...
Last time I used this, it was on an external hard drive case that the
sata connectors would need to be wiggled every time I powered it (even
tried re-flowing the solder joints!) Put this on it, haven't had to
touch the connectors in over a year.
If you guys are working on old equipment with sockets and connectors,
it's really worth looking at.
Dan
On 5/18/2013 4:46 PM, [email protected] wrote:
Resetting the boards may not do, but resetting the chips that are in
sockets probably will, based on my two 5370s Didier KO4BB "Mark C.
Stephens" <[email protected]> wrote:
>It is as you said Bob, I plugged the 5370b in and It flashed a zero
>then the display and front panel are blank.
>
>It has some other equipment in service on top of it so when I get a
>chance for some downtime, I'll pull it out and reseat the boards.
>
>
>Wish me luck!
>
>
>mark
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
