In a message dated 22/05/2013 09:32:33 GMT Daylight Time, [email protected] writes:
Just a Follow up, I checked the 10 Mhz output of the 9390 and it was... ~12 MHz. Uhuh, Wiggling some cables I came across one that when pressure was put on it, the frequency dropped back to 10Mhz. So My question is, (mostly to myself) Is the Efratom FRK Faulty and the root of the Drift? And how do I fix it, I ask myself? I have downloaded the FRK manual for perusal, I believe there is an external adjustment to bring it into lock area. -------------------- Before you even consider how to "fix or adjust" the FRK, in fact probably before doing much else at all, you need to be really sure whether or not that does have a problem. If you remove it from the 9390, or at least isolate the connections, and just test that on its own against your house standard, that should give you somewhere to start from. Regards Nigel GM8PZR _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
