For some of the TI and NXP boards I have seen, the debug chip is clearly bigger than the target, probably due to the fact that the debut chip has USB and USB is typically only supported in the bigger chips.
Didier Bob Camp <[email protected]> wrote: >Hi > >It is interesting how the various outfits sneak around the flash loader >issue on their low end boards. Some of the dual CPU approaches I've >seen actually have as much horsepower in the loader CPU as they do in >the target. I'm not complaining about getting 2 usable cpu's for a bit >over $10…. > >Bob > >On May 26, 2013, at 3:47 PM, Poul-Henning Kamp <[email protected]> >wrote: > >> In message ><CABbxVHvP0JmXo=ObnZUmtTH=7-ohixswixa0hy3svgo4gqd...@mail.gmail.com> >> , Chris Albertson writes: >> >>> Probably, one of the best advantages of AVR over PIC is that with >avr you >>> can use the GCC compiler. >> >> I recently had enough of all the trouble with both AVR and PIC chips >> and went ARM, which gives you way better C-language support than >> either has ever done. >> >> My current preference for random hacks is this one: >> >> https://www.olimex.com/Products/ARM/NXP/LPC-P1343/ >> >> This one has the neat feature that the "firmware-load mode" gives >> you are 32KB "USB-stick" with a single file called "firmware.bin" >> which means that even your grandmother can figure out how to >> update the firmware if need be... >> >> -- >> Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 >> [email protected] | TCP/IP since RFC 956 >> FreeBSD committer | BSD since 4.3-tahoe >> Never attribute to malice what can adequately be explained by >incompetence. >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > >_______________________________________________ >time-nuts mailing list -- [email protected] >To unsubscribe, go to >https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. -- Sent from my Motorola Droid Razr 4G LTE wireless tracker while I do other things. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
