I finally got around to testing a couple of FE5860 I bought on eBay 19 months ago for $30.00 a piece including shipping.
I have PPS, !0Mhz, lock indication all connected and working. Rs232 appears to be working as this command appears to have had a chat with the rubidium: C:\Documents and Settings\Administrator\Desktop\Rubidium>fe5680_info_win32.exe Cmd 0x22 0x0D byte reply: [22] [0D] [00] [2F] [44] [01] [8B] [45] [43] [FC] [F4] [DE] [1E] Cmd 0x22 ASCII (.): D..EC... Cmd 0x22 ASCII ( ): D EC Cmd 0x29 0x09 byte reply: [29] [09] [00] [20] [FF] [00] [00] [00] [FF] Cmd 0x29 ASCII (.): .... Cmd 0x29 ASCII ( ): Cmd 0x2B 0x15 byte reply: [2B] [15] [00] [3E] [32] [30] [30] [30] [30] [30] [30] [30] [2E] [30] [30] [30] [30] [30] [30] [00] [2C] Cmd 0x2B ASCII (.): 20000000.000000. Cmd 0x2B ASCII ( ): 20000000.000000 Cmd 0x2D 0x09 byte reply: [2D] [09] [00] [24] [00] [00] [00] [00] [00] Cmd 0x2D ASCII (.): .... Cmd 0x2D ASCII ( ): Cmd 0x47 0x08 byte reply: [47] [08] [00] [4F] [23] [20] [00] [03] Cmd 0x47 ASCII (.): # . Cmd 0x47 ASCII ( ): # Cmd 0x53 0x07 byte reply: [53] [07] [00] [54] [57] [00] [57] Cmd 0x53 ASCII (.): W. Cmd 0x53 ASCII ( ): W Cmd 0x57 0x56 byte reply: [57] [56] [00] [01] [20] [2F] [00] [32] [00] [35] [00] [39] [00] [3D] [00] [40] [00] [44] [00] [47] [00] [4B] [00] [4F] [00] [52] [00] [56] [00] [59] [00] [5D] [00] [60] [00] [64] [00] [68] [00] [6B] [00] [6F] [00] [72] [00] [76] [00] [79] [00] [7D] [00] [80] [00] [84] [00] [87] [00] [8B] [00] [8E] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [A5] Cmd 0x57 ASCII (.): /[email protected].].`.d.h.k.o.r.v.y.}................................... Cmd 0x57 ASCII ( ): / 2 5 9 = @ D G K O R V Y ] ` d h k o r v y } Cmd 0x59 0x56 byte reply: [59] [56] [00] [0F] [20] [6C] [FF] [82] [FF] [79] [FF] [7A] [FF] [80] [FF] [80] [FF] [82] [FF] [A0] [FF] [A1] [FF] [BB] [FF] [D4] [FF] [E3] [FF] [F0] [FF] [00] [00] [FB] [FF] [18] [00] [1B] [00] [1E] [00] [16] [00] [1D] [00] [16] [00] [1C] [00] [1D] [00] [2B] [00] [27] [00] [29] [00] [48] [00] [46] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [00] [E3] Cmd 0x59 ASCII (.): l...y.z.......................................+.'.).H.F......................... Cmd 0x59 ASCII ( ): l y z + ' ) H F Cmd 0x5A 0x0D byte reply: [5A] [0D] [00] [57] [01] [00] [FE] [0F] [76] [05] [36] [06] [B3] Cmd 0x5A ASCII (.): ....v.6. Cmd 0x5A ASCII ( ): v 6 Cmd 0x61 0x0B byte reply: [61] [0B] [00] [6A] [37] [35] [34] [33] [39] [00] [3C] Cmd 0x61 ASCII (.): 75439. Cmd 0x61 ASCII ( ): 75439 Cmd 0x65 (CS bad!) 0x07 byte reply: [65] [07] [00] [62] [20] [1C] [1C] Cmd 0x65 ASCII (.): . Cmd 0x65 ASCII ( ): Cmd 0x67 0x08 byte reply: [67] [08] [00] [6F] [01] [97] [B5] [23] Cmd 0x67 ASCII (.): ... Cmd 0x67 ASCII ( ): Cmd 0xF0 0x0E byte reply: [F0] [0E] [00] [FE] [33] [2E] [34] [00] [00] [00] [00] [00] [00] [29] Cmd 0xF0 ASCII (.): 3.4...... Cmd 0xF0 ASCII ( ): 3.4 However programs such as FE5680A that use the 'S' type commands don't seem to work. I am pretty happy with them but one is off by 0.1E-6 Hz. Ideally I'd like to trim it back closer to 10 MHz using rs232. Any hints graciously received with thanks :) -marki _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
