Hi How stable a 1.023 oscillator? How much pull range on that oscillator? Hmmmm…..
Bob On Jun 22, 2013, at 8:20 PM, Magnus Danielson <[email protected]> wrote: > Hi Bob, > > On 06/23/2013 02:06 AM, Bob Camp wrote: >> Hi >> >> Well if the chip rate is at or above 1 MHz, a wavelength is 300 meters or >> less. A 1 KM error is probably a bit to large. > > A tube-channel to keep tracking within a chip does not seem too hard. > Utilizing that precision for the rest of the calculation is a challenge. > > Each channel would naturally have their own 1.023 MHz crystal oscillator, > tweaked by the feedback loop control. That part would be pretty > straight-forward. There also needs to be a carrier oscillator for final > carrier removal. > > Doing this beast in transistors would be enough challenge and a good exercise > in itself. > > Cheers, > Magnus > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
