Here are some short demo videos that we used in our webinar recently (http://www.symmetricom.com/resources/downloads/webcasts/#Government%20Solut ions ). They're focused on the Symmetricom 3120A test set (née TimePod 5330A) but they illustrate some basic stability/noise measurement concepts that apply to other instruments as well. They're worth checking out if you use TimeLab, even with a counter, since the software is almost the same.
Video: https://www.dropbox.com/s/r6u83nmc70qpy8t/Evaluate_compare_and_calibrate_fre quency_standards.mpeg (viewable at http://www.youtube.com/watch?v=RgTVs4jqV6U ) Time: 4'30" Video: https://www.dropbox.com/s/psmpfeni8v1h5ku/Characterize_noise_and_jitter_of_O CXO.mpeg (viewable at http://www.youtube.com/watch?v=9PG9KNcmRPk ) Time: 5'49" Video: https://www.dropbox.com/s/s87ubu8q95etgs7/Observe_holdover_and_recovery_of_G PSDO.mpeg (viewable at http://www.youtube.com/watch?v=Jh8WOUVU46k ) Time: 3'49" Video: https://www.dropbox.com/s/f95r12b5hbpxhvz/Measure_residual_noise_of_10_MHz_a mplifier.mpeg (viewable at http://www.youtube.com/watch?v=d6Iq9M73Tcw ) Time: 5'05" Video: https://www.dropbox.com/s/po2ugf028p0dwef/Assess_mechanical_phase_stability. mpeg (viewable at http://www.youtube.com/watch?v=CvgSqhZb5iM ) Time: 4'07" (Disclaimers: I'm no longer selling these units myself, but I'm working with Symmetricom on both marketing and development. No animals were harmed in the making of these videos, although some valence electrons were temporarily inconvenienced.) -- john Miles Design LLC _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
