Hi Brian, I also wanted to reduce the amount of power wasted through passive devices. As it turned out, though, I had more tolerance for heat waste than I had thought. But, the general discussion this has become is also good.
Bob - AE6RV ----- Original Message ----- > From: Brian Alsop <[email protected]> > To: Discussion of precise time and frequency measurement <[email protected]> > Cc: > Sent: Sunday, June 30, 2013 10:48 AM > Subject: Re: [time-nuts] Regulator choices > > Maybe I read the original posting wrong but I think this thread has > departed greatly from the original posting. > > What I thought the posting said: > 1) The already present transformer can produce ~20 V DC unregulated at > sufficient current. > 2) The desire was to have a 12 V regulated at somewhat greater than 1 amp. > > Though it wasn't raised in the first posting. A clean, non-switching > supply was desirable for the poster. > > Thus, it isn't a case of attaching one regulator in series with another > > Regards > Brian _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
