Hi, I decided to buy a Nanos G20. Not too expensive, real serial port, debian linux pre-installed. I don't want to sound harsh as the people from Nanos probably did their best to produce a good product, but for timekeeping it is totally crap and also useless. Well, unless I did something wrong. I recompiled the kernel to enable PPS support, installed gpsd and ntpd, configured at all and let it run for a while.
allan deviation: http://keetweej.vanheusden.com/~folkert/nanosg20/allandev.png offset: http://keetweej.vanheusden.com/~folkert/nanosg20.png remote refid st t when poll reach delay offset jitter ============================================================================== x127.127.28.0 .NMEA. 0 l 3 16 377 0.000 -994.05 7.857 x127.127.28.1 .PPS. 0 l 7 16 377 0.000 -250.13 572.812 +192.168.64.18 .PPS. 1 u 66 128 377 0.553 -0.055 0.033 *192.168.64.2 .PPS. 1 u 99 128 377 0.237 -0.062 0.039 +192.168.64.168 .PPS. 1 u 44 128 377 0.646 -0.013 0.321 Folkert van Heusden -- MultiTail na wan makriki wrokosani fu tan luku den logfile nanga san den commando spiti puru. Piki puru spesrutu sani, wroko nanga difrenti kroru, tya kon makandra, nanga wan lo moro. http://www.vanheusden.com/multitail/ ---------------------------------------------------------------------- Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
