It may be heavy but is a VERY nice analyzer.
I have a Tek 495P which is also a very nice analyzer, goes to 1.8 GHz, is
smaller and somewhat lighter ("portable"), and should be findable in nice
condition for under $1k.
On 7/13/2013 11:09 PM, Perry Sandeen wrote:
List,
I just purchased a HP 3585 spec analyzer on E bay
for a reasonable price. I wanted this
instead of the 181 series as the range was more to what I’d be using and it was
of a newer vintage. The 3585a goes from
10 Hz to 40 MHz which is a most useful range for my purposes. so far, so good.
The problem is I didn’t know the beast weighed a svelte
88 pounds! Double Hernia time!
What I’d appreciate advice for a used spec
analyzer in the $1,000 range that is at least much lighter. A smaller size
would also be a benefit. I probably would never use it above 100 MHz. A
slightly smaller screen would be OK.
Suggestions appreciated.
Regards,
Perrier
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3204/5989 - Release Date: 07/13/13
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
