Or mold some Polymorph <https://www.sparkfun.com/products/10951> around the DB-9.
On Thu, Jul 25, 2013 at 3:28 PM, Chris Albertson <[email protected]>wrote: > Make your own cable from a bare DB-9 connector, solder and shrink tube. > > > On Thu, Jul 25, 2013 at 2:54 PM, Eric Williams <[email protected]> wrote: > > > Maybe "low-profile rs232"? > > > > Something like: http://www.cablestogo.com/product/52138 > > > > > > > > On Thu, Jul 25, 2013 at 1:51 PM, Hal Murray <[email protected]> > > wrote: > > > > > > > > After all the discussions about the cost of power, I'm getting my act > > > together and replacing my old power hungry PCs with new/modern Atom > > boards. > > > I found one that has 2 RS232 connectors. Looks good. > > > http://www.mini-box.com/Intel-D2500CCE-Mini-ITX-Motherboard > > > > > > The catch is that they are only 0.625 inches apart and most of the > > > connectors > > > on my RS232 cables are just a bit thicker than that so I can't use both > > at > > > the same time. > > > > > > Does anybody have a source of cables with thin connectors? Is there a > > > magic > > > term to google for? > > > > > > I think I tried filing one down a while ago. Modern plastics/rubber is > > > really tough. Maybe I should try again with a better mechanical setup, > > > maybe > > > build a jig to hold it. > > > > > > -- > > > These are my opinions. I hate spam. > > > > > > > > > > > > _______________________________________________ > > > time-nuts mailing list -- [email protected] > > > To unsubscribe, go to > > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > > and follow the instructions there. > > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > > -- > > Chris Albertson > Redondo Beach, California > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
