Hi Ideally you would like 12 volts +/- 0.1 V, but +/-0.5 will work. 5V +/- 0.25 is best, but +/- 0.5 should work ok. -12 +/- 1V is ok, you can get away with something looser. What ever you have should be well regulated, at least on the +12 line.
Bob On Jul 26, 2013, at 2:17 PM, steve gunsel <[email protected]> wrote: > Hi, > > I recently purchased a surplus Trimble Thunderbolt and would like to get it > going. The 24 volt units have a fairly wide range of acceptable voltages. The > only power supply specs I can find for mine specify +5, -12 and +12. No > min-max is specified. I have a power supply that has +5, +15 and -15 volts > available that I'd like to use but not unless within acceptable limits. Does > anyone know what the power supply specs are? > Thanks. > > Steve N8MYA > Medina, OH > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
