Been there, done that. The RFTGm-RB can be disciplined if you connect the pps and the gps data stream coming from a motorola Oncore. Regards Guido
Von Samsung Mobile gesendet Rex <[email protected]> hat geschrieben: I don't think the rubidium module for these systems can be disciplined. I think they were only intended as a backup if the XO section or GPS failed. The XO section does discipline but I don't know the details. I'm not sure of the model number, Lucent had several variations on the same theme in that time frame. I had one of the rubidiums that may be the same as yours. Trying to trace out some of the circuits, I found that the EFC on the LPRO connector was not being used at all. On 8/15/2013 7:52 AM, Alan Kamrowski II wrote: > Hi Everyone, > > > > I've only got the RFTGm-II-Rb module. I found an interface cable > specification here: > > > > http://www.ko4bb.com/Manuals/05%29_GPS_Timing/RFTG-m/RFTGm%20Interface%20Cab > le.pdf > > > > Does anyone know if feeding a 1pps signal to pin 9 might discipline it? Or > does it need the other connections such as GPS data, etc. > > > > Is there a ground on this connector? > > > > Thanks! > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
