Hi Peter, Thank you for posting this - it is interesting.
An @@Ea message only occurs once every 5 seconds? It seems odd that it comes up with 08-11-2017 at 12:00:00 My RFTGm-II-Rb doesn't seem to mind it isn't getting the @@En messages... Thanks, Alan -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Peter Bell Sent: Thursday, August 22, 2013 9:27 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Can someone post the @@Ea messages from a Motorola Oncore UT just powered up? The board on it's own comes up in a mode that doesn't send anything until it's initialized. The RFTG-m-XO is responsible for setting up the board. This is what you see on the RX line after powerup: Note that this is from WinOncore - the real data doesn't have the (Rx) prefix and the data is in binary rather than hex. After this, it repeats with one @@En message sent for every 12 @@Ea messages (Rx)@@Fa 8000 (Rx)@@Fa 8000 (Rx)@@Ea 081107E10C000000000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 (Rx)@@Aw 00 (Rx)@@Ay 00000000 (Rx)@@Az 00000000 (Rx)@@At 00 (Rx)@@Ag 0A (Rx)@@En 3C01000D0100000100000000000000010102020000D0090000000019000000001B2FAF080013 000000001600000000142FAF0800022FAF08000500000000 (Rx)@@Ea 081107E10C000500000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 (Rx)@@Ea 081107E10C000A00000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 (Rx)@@Ea 081107E10C000F00000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 (Rx)@@Ea 081107E10C001400000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 (Rx)@@Ea 081107E10C001900000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 (Rx)@@Ea 081107E10C001E00000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 (Rx)@@Ea 081107E10C002300000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 (Rx)@@Ea 081107E10C002800000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 (Rx)@@Ea 081107E10C002D00000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 (Rx)@@Ea 081107E10C003200000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 (Rx)@@Ea 081107E10C003700000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 (Rx)@@Ea 081107E10C010000000000000000000000000000000000000000000000000000008100000900 0000190000001B000000130000001600000014000000020000000500000009 On Thu, Aug 22, 2013 at 8:44 PM, Alan Kamrowski II <[email protected]>wrote: > Hi Everyone, > > > > I'm converting a Neo 6M GPS data stream to the Motorla Oncore UT data > stream my RFTG expects. When first turned on the 6M doesn't have a > 1pps signal yet, but does post NMEA messages which lack data are > invalid. My question is, what does the binary data stream from a > Motorola Oncore UT look like? > It is binary so if anyone has one and can capture a power on in hex > that would be very helpful. > > > > Thanks, > > > > Alan > > _______________________________________________ > time-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
