Hello Steve, Nice plots. Not bad ADEV. Not quite as good as a typical BVA, but respectable.
Who makes these and what package are they in? Thanks, Said Sent From iPhone On Sep 2, 2013, at 3:00, "Martyn Smith" <[email protected]> wrote: > Hello, > > I mentioned about there being other low Allan Dev oscillators available on > the market. > > Said asked me to supply some results (And Yes Said, I meant 1 x 10E-13) > > I'm not sure if attachments work on timeouts, so I have put a couple of > graphs on my website. > > These graphs show typical results for our low noise 10 MHz oscillator. > > This oscillator hasn't been optimised specifically for Allan Dev or phase > noise, just the best combination of both. > > We can achieve better phase noise at 1 Hz, -120 dBc being achievable, if we > select the best oscillator from a batch. > > And the Allan Deviation is only after the oscillators have been on a day or > so. They will improve if left on longer. > > www.ptsyst.com/10MHzPN-1.pdf > > We have improved the phase noise at 100 Hz and get about -156 dBc these days. > > www.ptsyst.com/10MHzAD-1.pdf > > Best Regards > > Steve > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
