Hi That of course *assumes* the firmware is there to do the time stamp in the first place. There are a lot of them out there that simply have nothing at all on the pps input.
Bob On Sep 2, 2013, at 8:03 PM, Magnus Danielson <[email protected]> wrote: > On 09/02/2013 06:27 PM, Bob Camp wrote: >> Hi >> >> 1) Because it's way more fun to do it this way >> 2) Because some / most PRS-10's don't have the 1 pps input enabled in the >> firmware they have loaded into them >> 3) Because you have more control over when you do / don't bump the frequency >> (you can see what's going on). > You don't need to use the PRS-10 internal algorithms, you can implement > it all yourself with a little program communicating with the PRS-10, > using it's time-stamping hardware and remote steering. > > Cheers, > Magnus > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
