Hi Before you run into it:
1) Normally the "oscillator tune" function in LH does not work correctly on that unit. Either the firmware does not allow filter updates (likely) or they use a different syntax than the one used by LH. 2) Best performance will come from a > 48 hour survey. LH is quite happy to do this for you. It's only worth doing after you decide on a permanent antenna location. 3) These modules normally operated with some moving air. At the very least, don't block up all the vents and stack a bunch of stuff above and below them. The main thing to watch out for is the temperature of the DC-DC converter brick. A touch test is perfectly adequate to tell you if it's getting hot. Bob On Sep 8, 2013, at 1:59 PM, quartz55 <[email protected]> wrote: > I'm getting 1.55e-12 ADEV at this point, about 20 hours into it. > > Why does the yellow line keep going full up and down, although not all the > time? > > Dave > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
