Hi Temperature stable to < 1/4 C for 2+ hours is pretty good for a normal home environment…..
Bob On Sep 8, 2013, at 8:07 PM, Mark Sims <[email protected]> wrote: > It is reporting temperature just fine. It probably has the "new" revision > temperature sensor chip that the firmware does not read the high res > temperature properly. Also, one version of those Nortel units (don't > remember which one) doesn't do high res temp readings even with the old rev > temp chip. > > The plots in Lady Heather default to auto-scaling and auto-centering with > each update. That can cause the plots to appear to jump around as new data > come in. > > And the F11 full screen mode toggle is known to not work with many > monitor/window size combinations. > > The Nortel units don't save the oscillator damping/gain/time constant > settings in EEPROM (at least with any of the documented commands). > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
