Hi The time constant / oscillator tuning data does not save to eeprom on the NTBW50 and similar units. Works fine on a TBolt….
Bob On Sep 10, 2013, at 12:07 PM, Charles Steinmetz <[email protected]> wrote: > Dave wrote: > >> Also how do I set the time constant, I can't find it anywhere except if I do >> the &a command but it resets back to 100s with a new start. > > Does the TC not get saved when you "save to EPROM"? It does with a > Thunderbolt. > > Also, a number of people have expressed confusion with making LH display > parameters "stick" from one session to the next. Learn the power of the > "slash" commands! Many LH parameters can be pre-set at launch using slash > ("/") commands passed to LH in the launch command. (LH can also read a > configuration or ".ini" file for these parameters, but I have not tried this.) > > If you look at the index you get when you hit <Spacebar>, one of the choices > will be to view the slash commands. (You can also use the slash commands > while LH is running, but they will not be saved. For that, you need to pass > them to LH at each launch, either in the launch command or in a configuration > file.) > > Best regards, > > Charles > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
