A good supply is desirable wall warts aren't. Enjoy your new Rb Regards Paul WB8TSL
On Thu, Sep 12, 2013 at 6:01 PM, Bob Stewart <[email protected]> wrote: > Thanks Bob. I looked at the datasheet again and found that they do like > 15-18. Unfortunately my "18V" supply is a wallwart that supplies > "22.5-18V, 2.0-2.5A". By the ordering, I assume that means it's load > dependent. So, I guess I'll find some Plan B. > > Bob > > > > > > >________________________________ > > From: Bob Camp <[email protected]> > >To: Discussion of precise time and frequency measurement < > [email protected]> > >Sent: Thursday, September 12, 2013 4:52 PM > >Subject: Re: [time-nuts] FE-5680A Voltage? > > > > > >Hi > > > >As I recall, 15 volts is sort of the minimum they recommend on most of > the variations of the 5680. The internal regulators will probably be > happier with 18 volts than with 14.25. You best bet is indeed a 15 V supply. > > > >Bob > > > >On Sep 12, 2013, at 11:03 AM, Bob Stewart <[email protected]> wrote: > > > >> I decided to order a Rb standard, and I was wondering what the lower > limit on the 15V power requirement is? I have a PSU that will go up to > 14.25V and my next closest is 18V. Should I just get a new 15V PSU before > this gets in? Maybe I can make a quick mod on the big one and take it up > to 15V. > >> > >> Bob - AE6RV > >> _______________________________________________ > >> time-nuts mailing list -- [email protected] > >> To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > >> and follow the instructions there. > > > >_______________________________________________ > >time-nuts mailing list -- [email protected] > >To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > >and follow the instructions there. > > > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
