Hi There are a *lot* of SMT OCXO’s out there. A J lead part is SMT, but identical to it’s through hole counterpart. It will mount pretty much same / same….
Bob On Oct 29, 2013, at 10:18 PM, John C. Westmoreland, P.E. <j...@westmorelandengineering.com> wrote: > Hello, > > I was wondering if I could get some recommendations on surface mount OCXO's > vs. the traditional through hole. > > I was also wondering on the board layout - if you found it necessary to > leave a thermal moat so to speak - and what worked best. Maybe the OCXO > has an internal air barrier that maybe would make this unnecessary - not > sure. > > Your input and experience appreciated. > > Thanks, > John Westmoreland > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.