Check out Srecord.sourceforge.net. Version 1.62 is current. You will need to build it as this is provided as source code only. It can be built for windows using Cygwin
Sent from my iPhone > On Dec 26, 2013, at 3:07 PM, Anton Kapela <[email protected]> wrote: > > Fellow nuts, > > I've got a TS2100 that failed to install/write a flash image of v 4.1 > (using firmware from http://ko4bb.com/). Looking at the tcpdump of the > packets in flight, I get the sense that the TS2100 isn't liking what > I've got to offer it (I'm assuming it's checking for SREC format, not > finding it, and aborts the transfer). After several failed attempts > to copy the image over (tried atftpd on linux, tftpd on fbsd and > osx...), I lost power and the unit is now setting on console port > only, using the v1.x recovery rom image. So, access is there, network > stack is up, etc. I tried again from the recovery image to copy over v > 4.1 to flash -- to avail. > > Of course, after this failed to work, I noticed that ko4bb's archive > of v 4.1 isn't SREC format (and I see many ref'x to the .HEX files as > having been provided in SREC format). It looks like what I've got is > an actual raw binary image of the executable code, not the SREC > equivalent. > > So, does a guy have to covert this binary to SREC himself, or is there > something I can nab right-quick online? > > ...better yet: can anyone confirm the zip archive on kobb.com is > legit, and not corrupt? > > Best, > > -Tk > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
