You can use an EPROM programmer utility: usually these utilities can load a binary file then you can save in Motorola SREC format. I use the ELNEC software to translate from/to binary/HEX.
On Thu, Dec 26, 2013 at 9:07 PM, Anton Kapela <[email protected]> wrote: > Fellow nuts, > > I've got a TS2100 that failed to install/write a flash image of v 4.1 > (using firmware from http://ko4bb.com/). Looking at the tcpdump of the > packets in flight, I get the sense that the TS2100 isn't liking what > I've got to offer it (I'm assuming it's checking for SREC format, not > finding it, and aborts the transfer). After several failed attempts > to copy the image over (tried atftpd on linux, tftpd on fbsd and > osx...), I lost power and the unit is now setting on console port > only, using the v1.x recovery rom image. So, access is there, network > stack is up, etc. I tried again from the recovery image to copy over v > 4.1 to flash -- to avail. > > Of course, after this failed to work, I noticed that ko4bb's archive > of v 4.1 isn't SREC format (and I see many ref'x to the .HEX files as > having been provided in SREC format). It looks like what I've got is > an actual raw binary image of the executable code, not the SREC > equivalent. > > So, does a guy have to covert this binary to SREC himself, or is there > something I can nab right-quick online? > > ...better yet: can anyone confirm the zip archive on kobb.com is > legit, and not corrupt? > > Best, > > -Tk > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
