Alan, good point I'd forgotten Pascall inherited this attenuator, I've a
vague recollection of using Hatfield ones decades ago and suspect the
spec was similar to:
http://ijkscopes.com/PDF_image/Pascall%20PDF/AC701_AC702.pdf
RS components retailed these for many years so that may be another
source for an older data sheet
Giuseppi, with any old attenuator its worth a DC resistance check to see
if one of the attenuator sections has not been fried over the years.
Should be easy enough to fix if somebody has been careless, I recall it
being made with standard wire ended resistors, 1.8 W or something similar.
David
--
Message: 5
Date: Tue, 7 Jan 2014 00:01:35 -0000
From: "Alan Melia"<[email protected]>
To: "Discussion of precise time and frequency measurement"
<[email protected]>
Subject: Re: [time-nuts] OT - Old Hatfield 2105 Step attenuator specs
Message-ID: <5A50B59B6A42487F8AEF9AF2AF8A7001@gnat>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=response
Hi agn Giuseppi that may indicate your units date from later, after the
company were acquired by Pascall
Alan
----- Original Message -----
From: "Giuseppe Marullo"<[email protected]>
To: "Discussion of precise time and frequency measurement"
<[email protected]>
Sent: Monday, January 06, 2014 4:05 PM
Subject: Re: [time-nuts] OT - Old Hatfield 2105 Step attenuator specs
On 07/01/2014 00:03, [email protected] wrote:
Re: [time-nuts] OT - Old Hatfield 2105 Step attenuator specs
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
