On Wed, Feb 12, 2014 at 2:10 PM, Lars Walenius <[email protected]>wrote:
> I have just changed all my Swedish comments in my source code and attached > it. I also copied the text to a Word-file so everybody can see it without > the Arduino Environment. > Thanks for posting this. I've been thinking for a long time that with today's parts one should be able to build a good GPSDO without need to make a PCB for spend $50 I'm reading the C source code now and of course have questions. Later I think I can build this on a solder less breadboard. But now I've just reading.. 1) what connects to analog pins A1, A2, A3, A4, and A5. The schematic shows only A0 used for the TIC capacitor. Later I might make some easy changes but I need to build the hardware first so I can test. One chance is that my Rb oscillator is controled via serial port, not a voltage. So I'll want the program to use serial commands rather than a DAC. You say your unit is pressure sensitive, well there are cheap and very easy pressure sensors that are easy to use It might be fun to see what I can do with a cheap $1 10Mhz crystal rather then using an OCXO. -- Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
