On 4/4/14 6:51 PM, Chris Albertson wrote:
The data connector is a standard 0.05 inch double row of male headers.
These are common but not nearly so common as the 0.1" type. I used a 2032
coin cell battery and holder I un-soldered from an dead PC motherboard.
Even a coin cell will last its shelf life at least.
You will need to level shift the serial data to/from the MT12 if you want
to connect it to a PC.
I was able to get a sample from Samtec of the connector and a ribbon
cable which I could then split out.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
