Hi Jim, here is the type....Sanyo ML621 ML 621 Rechargeable 3V cmos Backup BatteryNEW!
available on ebay...... best regards, Ernie. HG5ED. -----Original Message----- From: Jim Miller <[email protected]> To: time-nuts <[email protected]> Sent: Sat, Apr 5, 2014 1:04 pm Subject: Re: [time-nuts] M12+T module questions Jim/Chris Thanks for the connector/cable info. Regarding the battery: > I used a 2032 coin cell battery and holder I un-soldered from an dead PC otherboard. Even a coin cell will last its shelf life at least. According to the manual the module is designed for a rechargeable type hile the lithium coin cells I'm aware of (e.g. 2032) are primary and not echargeable. There is already a battery holder there which is perhaps 6mm n diameter. There is a tiny marking next to it "UV-R1" or "UV-M1". I'm aware of the need to shift the levels from the PC. Thanks for the eminder however. 73 jim ab3cv ______________________________________________ ime-nuts mailing list -- [email protected] o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts nd follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
