I have already searched on Time-Nuts list but I have not found any reference to my needs: because I know lots of you are using the same device, I will ask here:
I own an HP 53131A (opt 010) with firmware rev. 3413 according to its programming guide: If your Agilent 53131A contains Firmware Revision 3413, refer to the subsection titled "Firmware Revision Work-Around Commands" on page 4-77. It is important to refer to this subsection if your counter contains Firmware Revision 3413 because several measurement functions commands will not work with this firmware revision; thus, work-around commands must be used. The commands that required work-around commands are: [...] To your knowledge, is there any newer^ firmware release* without such limits? I have no trouble at all to (re)program the PLCC eproms. Unfortunately I do not know the serial # of the unit (bought to a flea market). . TIA _ Elio. ^) according to "Assembly-Level Service Guide" page 7-14, latest fw revision is rev 3646: *) on the "Assembly-Level Service Guide" page 6-8 they mention a fw rev 3427 which should be backward compatible... _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
