There have been a couple of questions on and off list. as to the specific listing. I did forget to mention one thing. The unit comes with a built in antenna. For time application not exactly what we want Not easy to take off since it is a block of ceramic with a pin through the center with little tolerance. Un soldering will not do doe to the heat sink created by the ceramic. Best way is to put the ceramic in a vice on its side excerpt a lot of pressure and it will brake or use a center punch or small hammer while it is under pressure. It will shatter. next remove the pieces with a knife since there is some glue. Now you are left with a pin. If you want to use the hole find a way to hold the board, heat the pin with a soldering iron and wiggle it out. Did it with two units no problem. Bert Kehren In a message dated 5/24/2014 5:57:04 P.M. Eastern Daylight Time, [email protected] writes:
While I agree the noise has risen quite a bit, as a mostly lurker here, I've learned quite a bit just watching the conversations. Indeed when Dr. Bruce posts I'm invariably driven into days of additional study to ponder his responses :-) Maybe someone could throw up a web page with the Ublox 7 findings if you don't want to discuss on this list? I have a selfish self interest as I too have a couple of 7's on the way to the US from China! Scott > On May 24, 2014, at 10:07 AM, Hans Holzach <[email protected]> wrote: > > bert, > > and how, please, are us newbies and dabblers supposed to learn from you, the elite time-nuts, when you keep your discoveries secret, only accessible to a group of hand-picked individuals? of course, this is a free world, and you, like everybody, is free to share or not to share your knowledge. however, this is my place to learn, and you don't do me a favour by saying goodbye to the group. why not share your knowledge here, ignore the silly questions of the not so bright, but give them the opportunity to follow your discussions with the ones that are on a par with you? that i'd appreciate very much! > > hans > > "...because the deterioration of the list has resulted in many on > the real time nuts have gone away and do like we do every thing off > list since this has deteriorated in to a chat room with the majority > of the listings not time or frequency related. Serious time nuts can > contact me off list and maybe be added to the group." > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
