Hello everyone, After reading quite a bit from your archives i've decided to try a put together a 10MHz reference.
I've picked up a oncore M12+T GPS card and have tried to initialise it but without any success thus far. The user manual for the M12+T seems to suggest that i should be able to hook the txd and rxd pins to a MAX3232 and be able to use the Winoncore software to configure the card. At power up the M12+T pins 1 & 2 are at 3V. After 10 seconds pin 2 sinks to 0V, pin 1 idles at 3V and pin 4 give 1PPS. No serial output from the card at all. Anyone have experience of connecting an M12+T to rs232? Stephen _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
