Hi Jerry PM sent.
I developed some years ago a GPSDO using the TU series GPS receivers, you can see the product on this link under the GPS: http://rudius.net/oz2m/ngnb/index.htm Regarding the TU-60 you need to convert from the Motorola format to Navmann format first and then from Navmann format to NMEA format, then you can read all the information on your sw programs. I use the program realterm to do this. When you turn off power it will not remember the NMEA setting not even with a backup battery and you need to do the procedure again, the TU-30 modules remember the settings. Regards Michael, OZ2ELA -----Oprindelig meddelelse----- Fra: [email protected] [mailto:[email protected]] På vegne af Jerry Sendt: 24. juni 2014 04:14 Til: [email protected] Emne: Re: [time-nuts] TU60-D120-041 power up Hi Michael, Thank you for your suggestion. This is my first post to the group so I hope I am replying correctly. I have downloaded WinLabMon (for Windows XP?) and WinOncore12 but I have not been able to communicate with the GPS receiver yet. Yes, please send me the program you mentioned and I will try it out. Please email to the address shown on my message. Thank you, 73 Jerry WA0ACF _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
