as long as it is not a gals/ceramic seal, there is no way to stop
sulfuric acid to get out from the cell, just imagine the dilatation
diffrence between plastic and metal...
73
Alex
On 7/28/2014 10:12 AM, Ed Palmer wrote:
As I understand it, the only time that any sealed lead acid battery
will vent is in the case of gross overcharging. The battery is
designed so that normal charge rates and correct float voltage will
result in recombination of any hydrogen and oxygen produced. Was there
a fault in the charging circuit or perhaps, the charging circuit
didn't have proper temperature compensation of the charge voltage?
Ed
On 7/28/2014 10:56 AM, Brooke Clarke wrote:
Hi:
Using lead acid batteries and a precision frequency standard is not a
good thing if they are too close together.
A number of decades ago (before the Time Nuts or the internet) I was
able to purchase a rack mount Gibbs 5 MHz double oven frequency
standard that used a very nice Bliley glass tube crystal because it
was not as precise as is was supposed to be. It used GelCell backup
batteries that were physically in the same rack chassis as the oven.
The fumes from the batteries when charging etched some traces off the
PCB inside the oven defeating the temperature control but leaving the
oscillator. It took a long time to reverse engineer and repair it.
I've added a photo of the cord wood construction of the cylindrical
oscillator. The core of the cylinder holds the glass bottle crystal
and the glass piston coarse tuning capacitor, surrounded by the first
heater, circuitry for the oscillator and dual temperature control
circuits on ring shaped boards. These fit inside a cylindrical
cavity which is the outer oven. I've added a photo of the inner
assembly at:
http://prc68.com/I/office_equip.html
Have Fun,
Brooke Clarke
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
