What I use: pin5 = gnd and pin8 = 24VDC, but Corby may have more info. I don't have specs on model 05818-501. For vintage parts like this an actual recent measurement is usually worth more than a vintage data sheet. I know from personal experience that many 5 MHz FTS/Datum 1000 and 1200 oscillators are stable to parts in ten to the -13th. I'll see if I can dig up phase noise plots for you.
/tvb ----- Original Message ----- From: "Ole Petter Ronningen" <[email protected]> To: <[email protected]> Sent: Tuesday, August 05, 2014 5:45 AM Subject: [time-nuts] FTS1000A 05818-501 spec's > Hello, all > > I went a bit overboard on ebay and ended up with a FTS1000A model > 05818-501. I've found the datasheet for the FTS1000 on ko4bb's site, but > the model numbers does not match up. Does anyone know the spec for this > particular model (phasenoise/stability), and if there's reason to suspect > that the pinout is different for this particular model? > > Thank you all! _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
