Chris Sorry its not working. Very nice looking unit though. I did the Frankenstein thing on my 5060/5061. So if its bad there is no harm in seriously digging in. After all its just physics. On Frankenstein it took me an honest 6 months and the support of the time-nuts you already have. Learned a ton in the process and the monster lives. I was lucky at the same time I came across a HP pico-amp meter and could read the tube current directly and it was pitiful. Good luck Paul WB8TSL
On Fri, Aug 29, 2014 at 6:10 PM, John Miles <[email protected]> wrote: > Looks like a really nice piece of hardware, well worth fixing up. You > might check the hot-wire ionizer filament on the Cs tube for continuity, as > a failure there may not show up in a meter indication. > > Apart from that, the detailed troubleshooting steps in the contemporary HP > Cs service manuals (5061A/5061B generation) would be very much applicable > to this one. The block diagram will be similar. You could try measuring > the beam current and SNR manually if all else fails; one approach that I > used is detailed at http://www.ke5fx.com/cs.htm . > > -- john, KE5FX > Miles Design LLC > > > -----Original Message----- > > From: time-nuts [mailto:[email protected]] On Behalf Of Chris > > Sent: Friday, August 29, 2014 2:05 PM > > To: [email protected] > > Subject: [time-nuts] Subject: Re: Oscilloquartz 3210 Cesium Standard > > > > So what am I missing ?. Did fill in the enquiry form at the > > Oscilloquartz web site a few days ago, but no reply. Should I try again, > > or are are there some special runes you need to recite before they will > > talk to you ? :-). Would be quite happy to pay a reasonable fee for a > > copy of the manual, paper or pdf... > > > > Regards, > > > > Chris > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
