Jason, we just did one using the ublox at 1 KHz and I have some boards extra so if you contact me off list I will gladly send you some data and schematic .Can be modified for 10 KHz. Bert Miami In a message dated 9/15/2014 9:46:35 P.M. Eastern Daylight Time, [email protected] writes:
I should drop an email rather than just lurking on this extremely interesting list. I'm in the process of building my first GPSDO, so I have lots to learn and am enjoying the education. This list has been a real eye opener for me. I'm a licensed amateur radio operator looking to move up into the microwave bands, and I spend a lot of time repairing old radio kit for reuse by other operators. As such an accurate time reference is important, hence this project. So far I've based everything on a number of published sites and designs to learn the basics before launching into something more adventurous and am building a simple PLL locked OCXO using a Navman Jupiter Tu60 GPS and an IsoTemp OCXO. Together these will exceed the limitations of my equipment in measurement, so I'll probably have to build a second one for comparison on the DSO or look into other measurement methods to validate the results. Lots to learn... -- -- Teach your kids Science, or somebody else will :/ [email protected] [email protected] callsign: vk2vjb _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
