On 29 Sep 2014 20:06, "Hal Murray" <[email protected]> wrote: > > >[email protected]: > > Unfortunately Keysight have now sold all the cables, but do have the front > > panel overlay which is arguably the most critical item. > > > Spending £500 on 5 cables and a front panel overly is more attractive than > > spending £8000 on an upgrading the model. > > For £500, I'll bet you can get a good hand crimp tool, some good coax, and a > handful of connectors.
Yes, but I have no way to test them. I don't have a 2.4 mm connector gage, and I am not keen to put 2.4 mm plugs into something very expensive without checking the pin depth first. I don't have a 2.4 mm cal kit, so I can't check the return loss. I would really like to find a male 2.4 mm connector gage and satisfy myself the cables, even if I get them professionally made. I believe someone might have some 2.4 mm HP cables. I can put the SMA on and at least check the pin depth. Dave. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
