I plan on removing the rear panel and making appropriate size holes on a mill
for USB connectors something like http://www.l-com.com/usb-panel-mount-usb-cables?cmp=011413 I will be using a shielded connector, same with the RJ45 connector http://www.l-com.com/ethernet-ecf-panel-mount-cat5e-rj45-jack-110-punchdown-style only using L-Com's site as a reference, in no way promoting them. In some of the industrial work I've done, I have used this type of connector/housing http://www.te.com/catalog/feat/en/c/20122 If you don't care about stuff radiating from your USB and Ethernet antennas, on the E just search "panel mount (USB,ethernet)" -pete On Wed, Oct 8, 2014 at 7:00 AM, Chuck Harris <[email protected]> wrote: > I'll introduce another angle to the discussion: > > How have others handled bringing the USB or Ethernet > interface outside of their 5370? There aren't exactly any > extra holes in the back panel to run the cables through. > > Is removing the HPIB connector "the way"? > > Is anyone making a replacement panel that has a USB > and an RJ connector mounted? > > I don't like leaving the lids off of my test equipment. > > -Chuck Harris > > Magnus Danielson wrote: > >> Hi Chuck, >> >> The benefit is that you can use Ethernet straight into the 5370, you can >> get much >> higher sampling rates and well, we can have fun hacking up more >> functionalities into >> the 5370 native support if we like to. >> >> Cheers, >> Magnus >> > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
