Hi Bill, I think it makes perfect sense. But I have no idea how the units' loop stability would be with the 10811. That kind of testing is on the plate.
You would preferably set the OCXO to a nominal tuning voltage of 1.5V using the mechanical adjustment, then let the LTE Lite do the rest. Please note that the LTE board will auto-sense the external ocxo frequency, so any of the boards would work. Please also note that due to the harmonic mixing issues I described earlier the best board to use for that setup would be the 19.2MHz version(!) or to remove the on-board tcxo altogether. Bye, Said Sent From iPhone > On Oct 18, 2014, at 15:24, Bill Dailey <[email protected]> wrote: > > Said, > > How tough would it be to mate the 10Mhz version up to a really good 10811? I > have one that I acquired from Corby some time ago. I was going to spin my > own but I wont realistically get to that with everything else I have going > on. I was thinking of throwing the LTE-Lite and the 10811 in a box. I > woudl then have a stock fury, An enhanced OEM fury (datum-1111c) and then > this gadget with a 10-13 10811. Let me know if this doesnt make sense. I am > an amateur. > > Bill > >> On Sat, Oct 18, 2014 at 5:13 PM, S. Jackson via time-nuts >> <[email protected]> wrote: >> Guys, >> >> one last email. The board will not fit into the Hammond enclosure without >> reworking the enclosure or removing the TCXO socket. We initially planned to >> ship the board without the socket, now all of them will have it. The >> board was designed to be used without the TCXO/Socket to fit into that >> enclosure. >> >> Caveat: please expect some rework to be necessary when using the suggested >> Hammond enclosure. >> >> bye, >> Said >> >> >> In a message dated 10/18/2014 12:56:06 Pacific Daylight Time, >> [email protected] writes: >> >> >> Guys, >> we have been getting a good number of emails with questions that have >> already been addressed in the user manual or the FAQ, see the below link. >> We >> spent a lot of time putting the collateral together, may I please ask >> that >> you first look into these two documents to see if your question might >> already >> be addressed there? >> Paul, >> please search the LTE Lite user manual for "Hammond" and you will find it >> there: >> http://www.jackson-labs.com/index.php/products/lte_lite >> Thanks, >> Said >> _____________________ >> Do you have a recommended Hammond chassis part number? >> -- >> Paul >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > > > -- > Doc > > Bill Dailey > KXØO > > > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
