Let us know how this is progressing. I am waiting on a TNC connector, so can't get mine up and running this weekend as planned. I'll get my power supply sorted out and see if I can get SatStat connected.
Do you know if the GPS input provides a 5v bias to drive an antenna? Anthony -----Original Message----- From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Bob Stewart Sent: Friday, October 24, 2014 8:47 PM To: Discussion of precise time and frequency measurement Subject: [time-nuts] Lucent KS-24361/Z3812A GPSDO initial setup Sorry if these comments are a bit naive, but this is my first exposure to a Z38xx. I've got mine powered on and connected to the antenna. After referring to Stewart's original post (once again) I've managed to download HP's SATSTAT and get it running. When I connected to the REF-1 unit (with the receiver) all I get is comms errors. But when I connect to REF-0, Satstat seems quite happy. It's reporting the unit as a Z3812A. Is REF-0 the only one you can connect to, or is REF-1 mute till it's happy with the GPS receiver? The mode says "Power-Up: GPS Acquisition", so I guess that's OK. I think things are progressing. It's attempting to survey, but reporting "Suspended: poor geometry". I suppose with a little more time this will work itself out? It seems to be slowly tracking more sats, as it's now up to 5. I wonder if there's a way to shortcut the survey process using Satstat? I've got a 48 hour survey done on this antenna with the LEA-6T, so I should be able to input those figures, right? I'll see if I can find anything in a Satstat manual I found. Bob - AE6RV _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
