Chris,

I’m curious how you have the PLL set up for the 5680 and GPS. Do you have any 
schematics, docs, etc?

I’m currently building a GPSDO based on James Miller’s design, and have a 
separate box with a 5680 in it (also grabbed from eBay for $40, since it 
“wouldn’t lock”, which was a simple fix).

Thanks! 

-Ryan Stasel

> On Oct 26, 2014, at 6:51 PM, Chris Albertson <albertson.ch...@gmail.com> 
> wrote:
> 
> On Sun, Oct 26, 2014 at 2:05 PM, Karen Tadevosyan <ra3...@mail.ru> wrote:
> 
>> I hope to use homemade GPSDO for the rubidium oscillator calibration.
>> 
> 
> You can save a little if you build a "GPS disciplined Rb".  It is just like
> building a GPSDO but you use the Rb in place of the OCXO.  Saves money and
> I think gives better results because you do not have to transfer frequency
> from the crystal to the Rb.  Unless you need the OCXO for some other reason.
> 
> I was luck to have bought the FE5680 back when they were $35 each.  They
> work well enough for my 10 digit frequency counter.
> 
> -- 
> 
> Chris Albertson
> Redondo Beach, California
> _______________________________________________
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to