On 29/10/2014 22:22, Bob Camp wrote:
Hi
It is not at all unusual for signals to be re-clocked when going into a micro.
Often the documentation on this process is somewhere between vague and
non-exsistant.
Bob
Yes, luckily the Sitra TRM has a nice clear diagram for the mechanism I
use and the signals are re-clocked twice on their way in to the BBB
(@100mhz for the OCP bus then @200mhz for the PRU).
The timing at the BBB is not critical though, the signal is captured in
the sampler @ 10mhz and the BBB has a shade under 100ns to read it
before the next sample comes in. In initial testing, I had the BBB
continuously sampling and had no problems keeping up @10mhz (I actually
had to slow it down to make it work).
Cheers
Simon
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
