Hi If the GPS box is the one in control of the survey process (maybe) then the slave box is just watching what’s happening. I would trust the GPS box far more than the slave when it comes down to fine grain GPS goings on.
Bob > On Nov 3, 2014, at 10:52 AM, Bob Stewart <[email protected]> wrote: > > Hi, > It's possible that my REF-1 had a software fault. I power-cycled both units, > and now I can talk to both. However, I see that there is at least one > difference. During the survey period, REF-0 mode only says "SURVEY". REF-1 > gives the percentage complete as shown on page 1-10 in the Z3801 users guide. > So, now I don't know whether or not to trust REF-1. > > They have just let me know they are shipping the replacement, so this is all > going to work out somehow. > > Bob > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
