Hi Bill, I think I got my copy here. I used the bottom one. I don't know what a 58503 is. it was hard to find, for some reason. I'm using XP on an old laptop.
http://www.ko4bb.com/manuals/index.php?dir=05%29_GPS_Timing/SatStat Bob From: Bill Riches <[email protected]> To: 'Bob Stewart' <[email protected]>; 'Discussion of precise time and frequency measurement' <[email protected]> Sent: Friday, November 7, 2014 7:04 AM Subject: RE: [time-nuts] Lucent KS-24361 GPSDO arrived today several questions Hi Bob and group, Where are you obtaining Satstat and what windoze version will it work on? XP, W7 32 or 64 bit? XP I guess? Bill Riches Cape May -----Original Message----- From: time-nuts [mailto:[email protected]] On Behalf Of Bob Stewart Sent: Friday, November 07, 2014 12:03 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Lucent KS-24361 GPSDO arrived today several questions Hi Bob, I've been using the Satstat program to send commands. What I don't understand is why the slave will accept commands such as sat elevation angle and not give an error response. It gives a response of "command complete", but it doesn't change it. Or is that an indication that both units use the same firmware, and success is actually indicated by the resulting change of the angle? Bob From: Bob Camp <[email protected]> To: [email protected]; Discussion of precise time and frequency measurement <[email protected]> Sent: Thursday, November 6, 2014 6:07 PM Subject: Re: [time-nuts] Lucent KS-24361 GPSDO arrived today several questions --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
