HI Ok, that’s very cool !!!!
If you can hit all the SCPI stuff *and* the PPS on the one connector, there is no need to wire to the DIAG port at all. Thanks! Bob > On Nov 17, 2014, at 11:55 AM, Götz Romahn <[email protected]> wrote: > > read this on: > http://www.realhamradio.com/gps-satstat-software.htm > > When you first turn on the Z3816A GPS receiver, it is always continuously > sending time. There are two commands you need to use: one to put it into the > SCPI> command mode, the other to switch it back to sending time. The two > commands are: > > To go to the SCPI mode: > ptim:tcod:cont 0 > > To go to the continuous time mode: > ptim:tcod:cont 1 > > this holds true also on the J6 (RS422/1PPS) connector of the Lucent KS-24361 > Z3811 and maybe Z3812 ( watchout there is no !! echo if you are using a > terminal software but Z3811.exe works fine). > cheers Götz > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
