Hi

Let’s say that an OCXO based new part is $500. Who knows if that applies to the 
Furry. If it does, that’s a really good price. Anything below that and Santa 
Claus is coming to your house early. 

Are you putting this in a commercial system?

Do you expect to need warranty support?

I’d bet the reasonable answer to both is no.

The KS boxes are $150 for the pair. They are new old stock. 

Do you believe the newer part works better than the KS ADEV wise?

Again I’d say the reasonable answer is no. The KS boxes are essentially the 
same as a Z3801 in terms of ADEV. 

You can get (in this example case) three of the KS box pairs and still save 
money over the new part. Shipping might tip that one way or the other. 

Why would this matter?

With three boxes, you can check them against each other and rule in / rule out 
problems with any one pair. That’s keeping everything plug and play. If you 
want to do a few “wire a connector” mods, you can have six sources to compare 
against each other. You can also have a whole bunch of spares ….

Bob


> On Nov 27, 2014, at 5:58 PM, Dr. David Kirkby (Kirkby Microwave Ltd) 
> <[email protected]> wrote:
> 
> Dr David Kirkby
> 
> On 27 Nov 2014 23:27, "Brooke Clarke" <[email protected]> wrote:
>> 
>> Hi Dave:
>> 
>> http://www.ebay.com/itm/171504585820
>> 
>> http://www.prc68.com/I/LTE-LiteGPSDO.html
> 
>> Brooke Clarke
> 
> I was aware of them, and are still contemplating getting one, but the Fury
> from Jackson Labs uses an OCXO, so will have better performance.  I don't
> know what that costs though.  Clearly more than the LTE Lite.
> 
> Siad should consider putting the Fury on eBay,  but I would rather pay
> direct, which would save them the eBay fees, so hopefully cost me less.
> 
> Dave
> _______________________________________________
> time-nuts mailing list -- [email protected]
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to