For a man with two watches, he's not really sure what time it is....... Sorry. Couldn't resist.
I like the idea of having multiple GPSO's to compare with each other. If they all agree, then likely, all are accurate. The next level would be a CS or other primary standard. I would favor having three, different, GPSDO's. If all agree, likely all are accurate. I just hooked up the Lucent KS-24361 pair, let them 'lock', then compared their 10 MHz TP to a TBolt and they were 'locked'. I also have a pair of the Lucent RFTG devices that I have yet to 'turn on'. As best I can tell, the 'interconnect' cable is not a 'straight through' cable like the KS-24361. Once I have a chance to make a cable, I'll give them a try as well. Good luck. Joe -----Original Message----- From: time-nuts [mailto:[email protected]] On Behalf Of johncroos via time-nuts Sent: Sunday, November 30, 2014 5:43 PM To: [email protected] Subject: [Bulk] [time-nuts] Hp Family GPS DOs vs. Tbolts Rev 3 SW and Trimble VCXO With all of the discussion of the recent availability of various HP family GPS DO devices, I was wondering if I should get a couple. Presently I have a couple of T-bolts that seem to serve me well. What wold be the advantages gained by going to the HPs. Need 10 MHz output though. Any thoughts? -73 john roos k6iql _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
